NEW COMPREHENSIVE 
Pneumatic Accessories from Nex Flow™
Magnetic Base
The Nex Flow™ Magnetic Base is used where the air operated products is required to be frequently moved. The extra strong magnet allows for flexible mounting, whether vertical or horizontal. Optional mini shut-off valve can be supplied.
Electronic Temperature Control For Panel Coolers
Electronic Thermostat ELC (Electronic Control Digital Thermostat) is a way for precise control of one or two Nex Flow™ Frigid-X™ panel coolers.
- Supply Voltage: AC120/240V
- Sampling Rate: 4/sec (almost double that of nearest competitor)
- Accuracy: 0.2% of full scale (under 10% of a degree)
- 3 Outputs: Two relay outputs and one with PID, 1SSR output with PID to control external SSR
- 50° to 100°C measuring range
- It has two Alarm settings for the two output relays so you can set two different temperatures to control two different solenoids for two separate coolers (and can be used to control anything electrical)
- AutoTune Mode for quick set ups
- NEMA 4 Enclosure (ASS/PC), ULC approved - it is accepted anywhere in the world - Lexan door: U94-V-0
- Standard unit comes with one solenoid valve, but it can operate two units and also complete additional tasks
- °F or °C and easily switchable back and fort
Swivel Fittings
High quality stainless steel swivle fittings for air nozzles, air jets, small air knives, and air amplifiers allow for a 25 degree movement from the center axis (50 degree total movement) to aim then secure in position the blow-off application.
Reclassifying Mufflers
Reclassifying mufflers provide excellent noise reduction - as much as 35 dBA - and more than sintered mufflers. In addition they are used to reduce oil mist.
The exhaust air from valves and cylinders may contain oil mist that can have a negative effect on the healthof employees. OSHA standard 29 CFR 1910 limits the cummulative exposure to tool oil mist 4.32 parts per million (PPM) in ay given eight hour work period.
The reclassifying muffler we provide uses a patented wrap design for the removable element that separates the oil from the exhausted air virtually trapping all oil in the element. Based on the input of 50 PPM ay 100 PSIG of oil, the exhausted oil mist is reduced to 0.016 PPM. A 1/4" tube can be attached to the bottom resorvoir where the oil accumulates to drain it.
Each reclassifying muffler is sized to pass a certain volume of compressed air with minimal restriction to avoid any effect on the operation of the cylinder or valve. For cylinders refer to the pdf file for our model numbers based on the bore size and stroke of the cylinder.
Rigid Flex Hose
The unique Nex Flow™ Rigid Flex Hose is an all stainless steel hose that does not break after a few bends like competative rubber hoses with simple copper inserts. It is resistant to creep and crimping. Its all stainless steel construction allows its use in any difficult environment. The rigid flex hose has a 1/4" male NPT welded end connection and come in 6"and 12" lengths.
