Category Archives: Air Compresser

Introducing The Nex Flow™ X-Stream™ Liquid Super Separator

Posted on by
Reply

The Nex Flow™ X-Stream™ Liquid Super Separator uses a world patent pending special radial nozzle centrifugal design to remove 99.9% of liquid mist (including water and oil mist) without the need of a replaceable filter element. Standard sizes are 9, 22, and 64 SCFM.

Unlike large upstream separators, these units are designed to be used upstream from an air gun, blow-off product or any device using compressed air and may be used in place of a standard air filter. If micron size is a concern, you can still use a standard water or oil filter but the replaceable cartridge life will be dramatically extended as the X-Stream™ Liquid Super Separator will remove the vast majority of the liquids and mist.

Units come complete with an automatic drain, have extremely minimal pressure loss and are virtually maintenance free. (Only the automatic drain may be subject to wear and tear and is easily replaced.)

Despite the use of driers at the compressor location, there can often still be condensation and moisture entrainment into air lines downstream of the compressor causing havoc with cylinders, solenoid valves, tooling and blow-off and other pneumatically operated equipment. Traditional filters normally used can sometimes be overloaded requiring frequent replacement of cartridges – a maintenance and downtime cost.

The Nex Flow™  Liquid Super Separator is placed upstream from the point of use and upstream from existing filters to remove the moisture and particulate. Existing filters may be replaced or simply kept in place for extra security but the life span of their cartridges can be extended four to five times or more.

We are so confident of the Nex Flow™ Super Separator we offer a five year warranty.

Available in three capacities: 9 SCFM, 22 SCFM and 64 SCFM. Units may be installed in parallel to address different requirements as necessary.

Applications and industries:
Paint Lines
Pharmaceutical
Food Industry
Semiconductor Industry
Shipbuilding
Power Plants
Precision Metal Working
Prevent line Freezing
Cement Industry
Automotive Industry
Textile Industry
Pulp & Paper Plants
Chemical Industry
Packaging

Contact:

Nex Flow Air Products Corp.
10520 Yonge Street, Unit 35B-220
Richmond Hill, ON, L4C 3C7

USA and Canada: +1-877-797-2777
International: +1-416-410-1313

FAX: +1-416-410-1806

sales(at)nexflowair(dot)com

http://www.nexflowair.com

Introducing The New Nex Flow™ ½” Ring Blade™ Air Wipe

Posted on by
Reply

The Nex Flow™ Ring Blade ™ Compressed Air Operated Air Wipe, already used extensively for blowing off liquids and dirt from ring blade Ring Blade extruded surfaces is now available in ½” diameter for blowing off small diameter parts such as wire or small rods.

Priced among the lowest of any competitive but often poor copy, the Nex Flow™ Ring Blade™ air wipe comes with an anodized aluminum body, and stainless steel shim and screws at a price below products containing only cheap plastic shims and not even anodized bodies. Nex Flow™ Ring Blade™ air wipes are complete with materials you “pay extra” for from many over-priced competitors.

ring blade

Ring Blade

The Nex Flow™ Ring Blade™ Air Wipe provides a uniform 360 degree stream of “amplified” air flow for blow off, drying, cleaning and cooling of almost any extruded shape, hose, pipe, cable, wire, automotive EPDM trim, rod and other materials. The unique split design makes it easy to clamp over and around the surface and to insert the material in between the two jointed halves , eliminating any need for threading. Amplified air occurs by en-training air along with the small amount of compressed used converting pressure to “high flow” and velocity for a strong blow-off force while minimizing compressed air use.

The high temperature version comes with a stainless steel braided coupling hose at very little added cost and still much lower than competitive units offering the same, and often less quality.

Available in the new ½” as well as the original 1”, 2”, 3”, 4”, 6” diameters.

Applications include the following:

1.    Blow off contamination and dust from surfaces
2.    Cooling of hot extruded materials
3.    Wipe wet surfaces uniformly
4.    Drying of tubing, rods and extruded profiles of all shapes
5.    Remove excess moisture from automotive EPDM profiles
6.    Dry wire, hose, tubing and wire optic extrusions
7.    Minimize loss of solution due to drag-out
8.    Cleaning of paint gun tipes
9.    Drying of screen print and ink jet printed surfaces
10.    Cleaning of ribbon and strips of material
11.    Drying after washing, cleaning, coating, coating or plating of shapes
12.    Window profiles and other extrusions

The Nex Flow™ Ring Blade™ Air Wipe has proven to be of high quality, high performance and with low noise levels. Its anodized aluminum body withstands the plant environment longer than often non-anodized competitive models.

See http://www.nexflowair.com or http://www.nex-flow.com for full product details and prices.

Sizing help is just a E-mail away at sales(at)nex-flow(dot)com or by calling Toll Free 1-877-797-2777 in the USA and Canada.

International calls use +1-416-410-1313.
NEX FLOW™ AIR PRODUCTS CORP.